One of the biggest reasons that people will choose to use a drywall texture sprayer is to make a less than perfect drywall job look more perfect. There are many different ways that you could choose to add texture to your drywall. However, the drywall texture sprayer is one of the quickest and simplest tools for getting this job done.
Keep in mind that this is one way that you can improve the overall appeal of your drywall job without having to spend a lot of money. This is something that is affordable and really is much easier to do than you probably think. In addition, there are some simple things, which you can do in order to make things easier while you are attempting this process.
The first step that you will need to do when you are going to use a drywall texture sprayer is to start mixing the drywall compound. The best way to get the right consistency is to use a large sized bucket and mix in some water and then to use an electric drill with a paddle attachment. It is very important to make sure that there are no lumps in the compound so keep checking through it and even shake or swirl it some before you complete using the paddle attachment. You want the compound to be about the consistency of the pancake batter.
The next step is where you will get out your drywall texture sprayer. You need to open it and be ready to load the gun compartment with the compound that you have just finished mixing. Keep in mind the weight of the gun and the compound together. You will have to hold the gun the entire time that you are doing the job so consider this. For most people it works better to only fill the gun hopper about halfway rather than all of the way and making it too heavy to comfortably hold.
The third step is the set up of the drywall texture sprayer. This is where you will attach the air compressor. Make sure to follow all directions that come with your equipment and tools during this step. There are different pressures that need to be used depending on the type of product that you are using so make sure to do this in the correct way.
Next, you will just have to decide which nozzle you want to use to get the desired pattern or application of texture from your drywall texture sprayer. If you choose a larger nozzle, you will be able to get a heavier pattern then if you choose a smaller nozzle in which you will have a lighter pattern. Make sure to adjust all of the pressure settings so that you can get your desired look.
The final step is to start using your drywall texture sprayer to add texture to your current drywall. You need to stand about three to four feet from the wall that you are going to be spraying. You need to use a smooth motion to be able to make sure that you use uniform movements back and worth as well. Remember to stop periodically to make sure that you are getting an even application and to always check and make sure that there is an appropriate amount of compound in the gun too.